SUMITOMO T-82C+

Sumitomo T82C+ dilengkapi dengan NanoTune ™ menyempurnakan pengalaman sambungan Anda. NanoTune ™ mengurangi waktu yang Anda habiskan untuk bekerja dan mengurangi kerugian penyambungan secara keseluruhan, dengan menggunakan teknologi penyambungan AI pertama di dunia.

Waktu penyambungan: 5 detik, waktu pemanasan: 8 detik.

Fitur dan Keuntungan

Penyambungan ultra cepat: 5 detik.

Pemanasan ultra cepat: 8 detik.

Identifikasi serat otomatis (SMF, MMF, DSF, NZDSF, BIF, lainnya).

Kalibrasi busur otomatis.

Fungsi sambungan otomatis serat G.657.

Mendukung operasi penyambungan dua arah.

Tahan debu, tahan air dan tahan guncangan.

Ringkas & ringan (hanya 1,9 kg).

Pengoperasian layar sentuh.

Upgrade perangkat lunak melalui internet.

Pemeliharaan interaktif jarak jauh melalui internet.

Dilengkapi dengan video pelatihan pengguna onboard.

Spesifikasi

Optical fiber requirements

Material

Silica glass

Profile types

SMF (G.652), MMF (G.651), DSF (G.653), NZDSF (G.655), BIF (G.657), EDF

Fiber diameter

Cladding diameter: 80 µm ~ 150 µm, Coating diameter: 100 µm ~ 1,000 µm

Applicable fiber or cable size

up to φ1,000 µm

Drop cable (2.0×3.1 mm), Indoor cable (2.0×2.0 mm)

Cleave length

5~16 mm

10 mm

Standard performance

Splice loss (typical)

SMF: 0.01 dB, MMF: 0.01 dB, DSF: 0.034 dB, NZDSF: 0.03 dB

Splicing cycle time (typical)

5 sec. (Quick mode), 7 sec. (SMF standard mode), 7 sec. (Auto mode)

Heating cycle time (typical)

8 sec.

Splice & Heat cycles

Approx. 300

Fiber view & magnification

Two CMOS cameras observation, 380X (zoom: 760X) for X or Y single axis view, 270X for both X & Y dual axis view

Splicing programs

Max. 320

Heating programs

Max. 100

Functions

Loss estimation

Provided

Splice image capture / Splice data storage

200 images / 10,000 splice data

Proof test

1.96N (200 gf)

Universal clamps for 250µm, 900µm tight & loose buffer fiber

Provided

Reversible coating clamps

Provided

Dual automatic independent heaters

Provided (US patent 7,412,146)

User-selectable heater clamp operation

Provided

Onboard user training video

Provided

Automatic arc calibration

Automatically compensates for environmental condition changes

Arc test

Provided

Display of remaining Splice & Heat cycles

Provided (Battery mode)

Remote interactive maintenance

Provided

Terminals

DC output

DC12 V (for JR-6)

USB port

USB 2.0 (mini-B type)

Storage media

SD / SDHC memory card

Power supply

AC input

100 ～ 240V, 50 / 60 Hz (ADC-1430)

DC input

10 ～15 V

Battery module

Li-ion 10.8 V, 6,400 mAh (BU-16)

Mechanical Parameters

Monitor

5.0″ touch screen color LCD display

Size

128(W) x 154(D) x 130(H) mm (without anti-shock rubber)

Weight

1.9 kg (without battery), 2.2 kg (with battery)

Electrode life

3,000 arc discharges

Environment

Operating conditions

Altitude 0～6,000 m, Temperature -10～+50°C, Humidity 0～95% (non-condensing), Wind velocity up to 15 m/s

Storage conditions

Temperature -40～+80°C, Humidity 0～95% (non-condensing), Battery -20～+30°C (long term)

Dust resistance

Equivalent to IP5x (Operates normally after 8 hours in a dust chamber (containing dust of particle size 25 µm or below

Water resistance

Equivalent to IPx2 (Operates normally after being exposed to water dripping at 3mm/min. for at least 2.5 min on each of 4 surfaces tilted at 15°)

Shock resistance

Drop from 76cm on 5 faces (excluding top face)